Tandem Acidic CO2 Electrolysis Coupled with Syngas Fermentation: A Two-Stage Process for Producing Medium-Chain Fatty Acids.

The tandem application of CO2 electrolysis with syngas fermentation holds promise for achieving heightened production rates and improved product quality. However, the significant impact of syngas composition on mixed culture-based microbial chain elongation remains unclear. Additionally, effective methods for generating syngas with an adjustable composition from acidic CO2 electrolysis are currently lacking. This study successfully demonstrated the production of medium-chain fatty acids from CO2 through tandem acidic electrolysis with syngas fermentation. CO could serve as the sole energy source or as the electron donor (when cofed with acetate) for caproate generation. Furthermore, the results of gas diffusion electrode structure engineering highlighted that the use of carbon black, either alone or in combination with graphite, enabled consistent syngas generation with an adjustable composition from acidic CO2 electrolysis (pH 1). The carbon black layer significantly improved the CO selectivity, increasing from 0% to 43.5% (0.05 M K+) and further to 92.4% (0.5 M K+). This enhancement in performance was attributed to the promotion of K+ accumulation, stabilizing catalytically active sites, rather than creating a localized alkaline environment for CO2-to-CO conversion. This research contributes to the advancement of hybrid technology for sustainable CO2 reduction and chemical production.

Ferrihydrite-mediated methanotrophic nitrogen fixation in paddy soil under hypoxia.

Biological nitrogen fixation (BNF) by methanotrophic bacteria has been shown to play an important role in maintaining fertility. However, this process is still limited to aerobic methane oxidation with sufficient oxygen. It has remained unknown whether and how methanotrophic BNF proceeds in hypoxic environments. Herein, we incubated paddy soils with a ferrihydrite-containing mineral salt medium to enrich methanotrophic bacteria in the presence of methane (20%, v/v) under oxygen constraints (0.27%, v/v). The resulting microcosms showed that ferrihydrite-dependent aerobic methane oxidation significantly contributed (81%) to total BNF, increasing the 15N fixation rate by 13-fold from 0.02 to 0.28 µmol 15N2 (g dry weight soil) -1 d-1. BNF was reduced by 97% when ferrihydrite was omitted, demonstrating the involvement of ferrihydrite in methanotrophic BNF. DNA stable-isotope probing indicated that Methylocystis, Methylophilaceae, and Methylomicrobium were the dominant methanotrophs/methylotrophs that assimilated labeled isotopes (13C or 15N) into biomass. Metagenomic binning combined with electrochemical analysis suggested that Methylocystis and Methylophilaceae had the potential to perform methane-induced BNF and likely utilized riboflavin and c-type cytochromes as electron carriers for ferrihydrite reduction. It was concluded that ferrihydrite mediated methanotrophic BNF by methanotrophs/methylotrophs solely or in conjunction with iron-reducing bacteria. Overall, this study revealed a previously overlooked yet pronounced coupling of iron-dependent aerobic methane oxidation to BNF and improves our understanding of methanotrophic BNF in hypoxic zones.

Yield stress Measurement of municipal sludge: A comprehensive evaluation of testing methods and concentration effects using a rotational rheometer.

Accurate prediction and measurement of yield stress are crucial for optimizing sludge treatment and disposal. However, the differences and applicability of various methods for measuring yield stress are subjects of ongoing debate. Meanwhile, literature on measuring sludge yield stress is limited to low solid concentrations (TS <10%), understanding and studying the yield stress of medium to high solid concentration sludge is crucial due to increasingly stringent standards for sludge treatment and disposal. So, this study employed a rotational rheometer to measure sludge yield stress across a wide range of TS (4-50%) using steady shear, dynamic oscillatory shear, and transient shear. The study derived significant conclusions by comparing and summarizing the applicability and limitations of each testing method: Dynamic oscillatory shear methods, including G'-σ curve method, γ-σ curve method, and G**γc method can measure sludge yield stress ranging from 4% to 40% TS, while other methods are restricted to low or limited solid concentrations; The G' = G″ method, utilizing the intersection of G' and G″ curves, consistently yields the highest value for yield stress when 4%≤ TS ≤ 12%; The rotational rheometer cannot measure sludge yield stress when the solid concentration exceeds 40% TS; The relationship between sludge yield stress and solid concentration is stronger as a power-law for TS ≤ 25%, transitioning to linear for higher concentrations (28%≤ TS <40%). This study systematically explores the applicability and limitations of various measurement methods for characterizing sludge yield stress across a wide range of solid concentrations, providing valuable guidance for scientific measurement and highlighting challenging research issues.

Surface coating combined with in situ cyclic voltammetry to enhance the stability of gas diffusion electrodes for electrochemical CO2 reduction.

Electrochemical CO2 reduction (CO2RR), fueled by clean and renewable energy, presents a promising method for utilizing CO2 effectively. The electrocatalytic reduction of CO2 to CO using a gas diffusion electrode (GDE) has shown great potential for industrial applications due to its high reaction rate and selectivity. However, guaranteeing its long-term stability still poses a significant challenge. In this study, we conducted a comprehensive investigation into various strategies to enhance the stability of the GDE. These strategies involved modifying the structure of the substrate, such as the gas diffusion layer (GDL) and the back side of the GDL (macroporous layer side). Additionally, we explored modifications to the catalyst layer (CL) and the front of the CL. To address these stability concerns, we proposed a practical approach that involved surface coating using carbon black in combination with in situ cyclic voltammetry (CV) cycles on Ag/Ag300/polytetrafluoroethylene (PTFE). The partial Faradaic efficiency exceeded 80 % within a span of 70 h. Electron microscopy and electrochemical characterization revealed that the implementation of in situ CV led to a reduction in catalyst particle size and the formation of a porous surface structure. By enhancing the stability of the GDE, this research opens up possibilities for the advancement of hybrid systems that focus on the production and utilization of syngas.

Refining microbial potentiometric sensor performance with unique cathodic catalytic properties for targeted application scenarios.

Traditional microbial electrochemical sensors encounter challenges due to their inherent complexity. In response to these challenges, the microbial potentiometric sensor (MPS) technology was introduced, featuring a straightforward high-impedance measurement circuit tailored for environmental monitoring. Nonetheless, the practical implementation of conventional MPS is constrained by issues such as the exposure of the reference electrode to the monitored water and the absence of methodologies to stimulate microbial metabolism. In this study, our objective was to enhance MPS performance by imbuing it with unique cathodic catalytic properties, specifically tailored for distinct application scenarios. Notably, the anodic region served as the sensing element, with both the cathodic region and reference electrode physically isolated from the analyzed water sample. In the realm of organic monitoring, the sensor without Pt/C coated in the cathodic region exhibited a faster response time (1 h) and lower detection limits (1 mg L-1 BOD, 1 mM acetic acid). Conversely, when monitoring toxic substances, the sensor with Pt/C showcased a lower detection limit (0.004% formaldehyde), while the Pt/C-free sensor demonstrated superior reusability. The sensor with Pt/C displayed a heightened anode biofilm thickness and coverage, predominantly composed of Rhodococcus. In conclusion, this study introduces simple, cost-effective, and tailorable biosensors holding substantial promise for water quality monitoring.

Unveiling the Occurrence and Non-Negligible Role of Amino Sugars in Waste Activated Sludge Fermentation by an Enriched Chitin-Degradation Consortium.

Polysaccharides in extracellular polymeric substances (EPS) can form a hybrid matrix network with proteins, impeding waste-activated sludge (WAS) fermentation. Amino sugars, such as N-acetyl-d-glucosamine (GlcNAc) polymers and sialic acid, are the non-negligible components in the EPS of aerobic granules or biofilm. However, the occurrence of amino sugars in WAS and their degradation remains unclear. Thus, amino sugars (∼6.0%) in WAS were revealed, and the genera of Lactococcus and Zoogloea were identified for the first time. Chitin was used as the substrate to enrich a chitin-degrading consortium (CDC). The COD balances for methane production ranged from 83.3 and 95.1%. Chitin was gradually converted to oligosaccharides and GlcNAc after dosing with the extracellular enzyme. After doing enriched CDC in WAS, the final methane production markedly increased to 60.4 ± 0.6 mL, reflecting an increase of ∼62%. Four model substrates of amino sugars (GlcNAc and sialic acid) and polysaccharides (cellulose and dextran) could be used by CDC. Treponema (34.3%) was identified as the core bacterium via excreting chitinases (EC 3.2.1.14) and N-acetyl-glucosaminidases (EC 3.2.1.52), especially the genetic abundance of chitinases in CDC was 2.5 times higher than that of WAS. Thus, this study provides an elegant method for the utilization of amino sugar-enriched organics.

Super-fast Charging Biohybrid Batteries through a Power-to-formate-to-bioelectricity Process by Combining Microbial Electrochemistry and CO2 Electrolysis.

Extensive study on renewable energy storage has been sparked by the growing worries regarding global warming. In this study, incorporating the latest advancements in microbial electrochemistry and electrochemical CO2 reduction, a super-fast charging biohybrid battery was introduced by using pure formic acid as an energy carrier. CO2 electrolyser with a slim-catholyte layer and a solid electrolyte layer was built, which made it possible to use affordable anion exchange membranes and electrocatalysts that are readily accessible. The biohybrid battery only required a 3-minute charging to accomplish an astounding 25-hour discharging phase. In the power-to-formate-to-bioelectricity process, bioconversion played a vital role in restricting both the overall Faradaic efficiency and Energy efficiency. The CO2 electrolyser was able to operate continuously for an impressive total duration of 164 hours under Gas Stand-By model, by storing N2 gas in the extraction chamber during stand-by periods. Additionally, the electric signal generated during the discharging phase was utilized for monitoring water biotoxicity. Functional genes related to formate metabolism were identified in the bioanode and electrochemically active bacteria were discovered. On the other hand, Paracoccus was predominantly found in the used air cathode. These results advance our current knowledge of exploiting biohybrid technology.

Enhancing data reliability in quantitative characterization of moisture distribution in sludge using DSC: Impact of sample attributes and test parameters.

Exploring moisture distribution, especially bound water content, is vital for studying and applying sludge dewatering. The differential scanning calorimetry (DSC) method has been extensively utilized for the quantitative characterization of moisture distribution in sludge. However, this method has certain limitations, such as low reproducibility of results, leading to controversial parameter values in different papers and hindering result comparison. In this study, we investigated the influence of key sample attributes on measuring sludge bound water using the DSC method.The findings demonstrated that the moisture content and mass of sludge samples substantially influenced the reproducibility and stability of DSC test results. To ensure data reliability, the moisture content of the sludge sample should be minimized and kept below 84%, with the mass not exceeding 10 mg. Compared to the influence of sludge moisture content and sample mass, the heating rate (1⁓5 °C/min) minimally affected DSC test results. This study offers a comprehensive insight into how sample attributes and test parameters affect the quantitative characterization of bound water in sludge using the DSC method. Furthermore, practical strategies are presented to enhance the method's applicability in sludge bound water characterization.

Novel Insight into Microbially Mediated Nitrate-Reducing Fe(II) Oxidation by Acidovorax sp. Strain BoFeN1 Using Dual N-O Isotope Fractionation.

Microbially mediated nitrate reduction coupled with Fe(II) oxidation (NRFO) plays an important role in the Fe/N interactions in pH-neutral anoxic environments. However, the relative contributions of the chemical and microbial processes to NRFO are still unclear. In this study, N-O isotope fractionation during NRFO was investigated. The ratios of O and N isotope enrichment factors (18ε:15ε)-NO3- indicated that the main nitrate reductase functioning in Acidovorax sp. strain BoFeN1 was membrane-bound dissimilatory nitrate reductase (Nar). N-O isotope fractionation during chemodenitrification [Fe(II) + NO2-], microbial nitrite reduction (cells + NO2-), and the coupled process [cells + NO2- + Fe(II)] was explored. The ratios of (18ε:15ε)-NO2- were 0.58 ± 0.05 during chemodenitrification and -0.41 ± 0.11 during microbial nitrite reduction, indicating that N-O isotopes can be used to distinguish chemical from biological reactions. The (18ε:15ε)-NO2- of 0.70 ± 0.05 during the coupled process was close to that obtained for chemodenitrification, indicating that chemodenitrification played a more important role than biological reactions during the coupled process. The results of kinetic modeling showed that the relative contribution of chemodenitrification was 99.3% during the coupled process, which was consistent with that of isotope fractionation. This study provides a better understanding of chemical and biological mechanisms of NRFO using N-O isotopes and kinetic modeling.

Enrichment of biofertilizer-type hydrogen-oxidizing bacteria on urea containing Cu(II).

With the utilization of pesticides and fertilizers (e.g. urea), the presence of nitrogen and heavy metals (e.g. copper) can enter and pollute the environment. Biofertilizers can be used to replace chemical fertilizers to increase crop yields and reduce environmental stress. The utilization of hydrogen-oxidizing bacteria (HOB) to be biofertilizers has recently attracted more attention. However, the enrichment of HOB on urea and the effect of copper are undetermined. HOB were successfully enriched using urea in this investigation. The average urea conversion rate (AUCR) was 180.08 mgN/L/d with a hydraulic retention time of 10 h. Microbial community (R1) was dominated by Hydrogenophaga (83.92%), a biofertilizer-type HOB. After addition of 5.47 mg/L Cu2+, the AUCR was decreased by 16%-151.18 mgN/L/d, and the growth of HOB was inhibited by 48%. Meanwhile, inhibition was also reflected by the increase of polysaccharide content (20.27 ± 0.57 to 33.45 ± 2.53 mg/gVSS) and protein content (106.19 ± 19.39 to 125.14 ± 24.73 mg/gVSS) of extracellular polymeric substances in the HOB. The resulting microbial community (R2) was changed to Azospiralium-dominated flora (91.33%). Both enriched microbial communities (R1 and R2) exhibited the abilities of ACC degradation and phosphate solubilization. This study demonstrates that employing urea can directly enrich biofertilizer-type HOB and copper-tolerant HOB can be obtained in a 5.47 mg/L Cu2+ environment. The results provide potential methods to obtain biofertilizer from copper-containing urea wastewater via HOB.

Sunlight Significantly Enhances Soil Denitrification via an Interfacial Biophotoelectrochemical Pathway.

Denitrification is an essential step of the nitrogen cycle in soil. However, although sunlight is an important environmental factor for soil, the investigation of the influence of sunlight on soil denitrification is limited to plant photosynthesis-mediated processes. Herein, a new pathway, denoted as a biophotoelectrochemical process, which is induced by the direct photoexcitation of soil, was found to greatly enhance soil denitrification. Using red soil as the research object, the soil with irradiation showed nitrate reduction that was 2.6-4.7 times faster than that without irradiation. The irradiation of soil accelerated the reduction of nitrite and enhanced the conversion of nitrous oxide to nitrogen, indicating that more electron sources were generated. This resulted from the photoinduced generation of ferrous substrates and photoelectrons. The contribution of irradiation to soil denitrification was almost half (45.4%), of which 30.9% was from photoinduced ferrous substrates and 14.5% was from photoelectrons. Moreover, a designed biophotoelectrochemical cell provided solid evidence for direct photoelectron transfer from soil photosensitive substrates to microorganisms. Irradiation promoted the enrichment of Alicyclobacillus, which participates in iron oxidation and electroautotrophy. This finding reveals a role of sunlight in soil denitrification that has been thus seriously overlooked and provides solid evidence for the natural occurrence of photoelectrotrophic effects.

What affects the accuracy and applicability of determining wastewater sludge water content via low-field nuclear magnetic resonance?

The accurate determination of waster sludge water content is crucial to sludge dewatering treatment and its disposal management. Though previous studies highlight the great advantages of low-field nuclear magnetic resonance (LF-NMR) in the determination of sludge water content, its accuracy and applicability are not well studied. Herein, this study investigated the settling of operating parameters and the properties of sludge samples on the accuracy and applicability of LF-NMR method in measuring sludge water content. The results showed that the setting of basic parameters such as standard curve, number of scanning times (NS) and sample weight affected the accuracy of sludge water content by LF-NMR. The standard calibration curve constructed by 3 g/L CuSO4, NS = 8 and the sample weight of about 5 g, were suitable for the accurate determination of sludge water content. Furthermore, the existence of magnetic substances in sludge can affect the distribution gradient of main magnetic field, and thus restricted the applicability of LF-NMR. The saturation magnetization of chemical reagents strongly correlated with the measured relative errors of sludge water content (r = 0.995, p < 0.01), the greater the saturation magnetization of the magnetic material, the greater the error of the test results. On the whole, it is necessary to fully consider the influence of process parameters and sludge properties to evaluate the accuracy and applicability of the LF-NMR method, rather than simply copying the parameters in literatures.

Identification and degradation of structural extracellular polymeric substances in waste activated sludge via a polygalacturonate-degrading consortium.

By maintaining the cell integrity of waste activated sludge (WAS), structural extracellular polymeric substances (St-EPS) resist WAS anaerobic fermentation. This study investigates the occurrence of polygalacturonate in WAS St-EPS by combining chemical and metagenomic analyses that identify ∼22% of the bacteria, including Ferruginibacter and Zoogloea, that are associated with polygalacturonate production using the key enzyme EC 5.1.3.6. A highly active polygalacturonate-degrading consortium (GDC) was enriched and the potential of this GDC for degrading St-EPS and promoting methane production from WAS was investigated. The percentage of St-EPS degradation increased from 47.6% to 85.2% after inoculation with the GDC. Methane production was also increased by up to 2.3 times over a control group, with WAS destruction increasing from 11.5% to 28.4%. Zeta potential and rheological behavior confirmed the positive effect which GDC has on WAS fermentation. The major genus in the GDC was identified as Clostridium (17.1%). Extracellular pectate lyases (EC 4.2.2.2 and 4.2.2.9), excluding polygalacturonase (EC 3.2.1.15), were observed in the metagenome of the GDC and most likely play a core role in St-EPS hydrolysis. Dosing with GDC provides a good biological method for St-EPS degradation and thereby enhances the conversion of WAS to methane.

Electricity-Driven Microbial Metabolism of Carbon and Nitrogen: A Waste-to-Resource Solution.

Electricity-driven microbial metabolism relies on the extracellular electron transfer (EET) process between microbes and electrodes and provides promise for resource recovery from wastewater and industrial discharges. Over the past decades, tremendous efforts have been dedicated to designing electrocatalysts and microbes, as well as hybrid systems to push this approach toward industrial adoption. This paper summarizes these advances in order to facilitate a better understanding of electricity-driven microbial metabolism as a sustainable waste-to-resource solution. Quantitative comparisons of microbial electrosynthesis and abiotic electrosynthesis are made, and the strategy of electrocatalyst-assisted microbial electrosynthesis is critically discussed. Nitrogen recovery processes including microbial electrochemical N2 fixation, electrocatalytic N2 reduction, dissimilatory nitrate reduction to ammonium (DNRA), and abiotic electrochemical nitrate reduction to ammonia (Abio-NRA) are systematically reviewed. Furthermore, the synchronous metabolism of carbon and nitrogen using hybrid inorganic-biological systems is discussed, including advanced physicochemical, microbial, and electrochemical characterizations involved in this field. Finally, perspectives for future trends are presented. The paper provides valuable insights on the potential contribution of electricity-driven microbial valorization of waste carbon and nitrogen toward a green and sustainable society.

Reactive Oxygen Species Promote Nitrous Oxide (N2O) Emissions from Soil/Sediment during the Anoxic-Oxic Transition.

Reactive oxygen species (ROS)-induced element/pollutant geochemical processes in fluctuating anoxic-oxic areas have received increasing attention in recent years. Nitrous oxide (N2O) is a strong greenhouse gas; however, the relationship between ROS and N2O emissions in these areas has not been established. This work revealed the essential role of ROS in promoting N2O emissions in soil/sediment during the anoxic-oxic transition. ROS decreased the rate of nitrate reduction by 26-31% and increased N2O emissions by 8.8-31.3% (at 48 h). ROS-induced N2O emission was via inhibiting the step of N2O reduction. During the anoxic-oxic transition, the contribution of ROS to inhibit the step of N2O reduction was higher than 52.6%, demonstrating the important role of ROS. The downregulated relative transcription of the NosZ gene demonstrated inhibition at the gene level. Hydrogen peroxide was the dominant ROS species inhibiting N2O reduction, while the role of hydroxyl radicals was negligible, suggesting a different behavior of N2O emission with common pollutant conversion induced by ROS during the anoxic-oxic transition. This study demonstrated an overlooked factor in promoting N2O emission in the soil/sediment and appealed to a re-examination of the mechanism of N2O emissions in fluctuating anoxic-oxic areas.

Instrumental role of bioreactors in nitrate/nitrite-dependent anaerobic methane oxidation-based biotechnologies for wastewater treatment: A review.

Recently, the nitrate/nitrite-dependent anaerobic methane oxidation (n-DAMO) processes have become a research hotspot in the field of wastewater treatment. The n-DAMO processes could not only mitigate direct and indirect carbon emissions from wastewater treatment plants but also strengthen biological nitrogen removal. However, the applications of n-DAMO-based biotechnologies face practical difficulties mainly caused by the distinctive properties of n-DAMO microorganisms and the limited/availability of methane with poor solubility. In this sense, the choice of bioreactors will play important roles that influence the growth and functioning of n-DAMO microorganisms, thus enabling dedicated development of the n-DAMO processes and efficient applications of n-DAMO-based biotechnologies. Therefore, this paper aims to discuss the three commonly-applied types of bioreactors, covering the individual working principle and state-of-the-art removal performance of nitrogen as well as dissolved methane observed when adopted for n-DAMO-based biotechnologies. With noted limitations for each bioreactor type, several key perspectives were proposed which hopefully would inspire future investigation and practical applications of the n-DAMO processes.

The mechanism of carbon source utilization by microalgae when co-cultivated with photosynthetic bacteria.

Microalgae-photosynthetic bacteria (PSB) co-culture, which is promising for wastewater treatment and lipid production, is lacking of study. In this work, the combinations of 3 microalgae and 3 PSB strains were firstly screened and then different inoculation ratios of the co-cultures were investigated. It was found the best promotion was Chlorella pyrenoidosa/Rhodobacter capsulatus co-culture (1:1), where the biomass productivity, acetate assimilation rate and lipid productivity were 1.64, 1.61 and 2.79 times than that of the sum of pure microalgae and PSB cultures, respectively. Meanwhile, the inoculation ratio significantly affected the growth rate and lipid productivity of co-culture systems. iTRAQ analysis showed that PSB played a positive effect on acetate assimilation, TCA cycle and glyoxylate cycle of microalgae, but decreased the carbon dioxide utilization and photosynthesis, indicating PSB promoted the microalgae metabolism of organic carbon utilization and weakened inorganic carbon utilization. These findings provide in-depth understanding of carbon utilization in microalgae-PSB co-culture.

Biocathode prepared at low anodic potentials achieved a higher response for water biotoxicity monitoring after polarity reversal.

Microbial electrochemical sensors equipped with biocathode sensing elements have attracted a growing interest, but their startup and recovery properties remain unclear. In this study, the approach of polarity reversal was applied for the biocathode sensing element fabrication and biosensor recovery. The stimulating/suppressing effect of formaldehyde was determined by the anode potential before polarity reversal as well as the increased trials of toxic exposure. Increasing anode potential from -0.3 V to +0.3 V before polarity reversal, the baseline electric signal was changed from -0.028 ± 0.001 mA to -0.005 ± 0.003 mA, while the maximum normalized electrical signal (NES) was increased from 1.1 ± 0.1 to 4.1 ± 1.9, and thus a general downtrend was observed for Response as a newly induced indicator. Polarity reversal failed to recover the electroactivity of these poisoned bioelectrodes. This study demonstrated that electrode potential was critical when using the approach of polarity reversal to construct the biocathode sensing element, and revealed an urgent need for strategies toward high recoverability of such biosensors.

Light-dependent enhancement of sulfadiazine detoxification and mineralization by non-photosynthetic methanotrophs.

Co-metabolism and photodegradation are two approaches for remediating trace organic compounds (TOrCs), however, interactions between the two with regards to TOrCs degradation have not been elucidated. In this study, sulfadiazine (SDZ) was chosen as a representative TOrC and Methylocystis bryophila as a typical strain. Under light conditions, about 80.6% of SDZ was removed by M. bryophila, but only 7.6% or 28.9% of SDZ was eliminated by either individual photodegradation or by co-metabolism. The SDZ stimulated more extracellular organic matter (EOM) production by M. bryophila. The enhanced SDZ degradation was attributed to indirect photolysis caused by the excited triplet state of EOM (3EOM*) and co-metabolism. The UPLC-QTOF-MS analysis showed that due to co-metabolism, the pyrimidine ring was broken and could further be oxidized into smaller molecules under light conditions, such as formic and acetic acids. The SDZ mineralization ratio increased from 9.9% under the co-metabolic condition alone to 36.5% under co-metabolism coupled with photodegradation. The Ames tests confirmed that the SDZ degradation products by co-metabolism were mutagenic, however, their toxicity was ameliorated by light during co-metabolism. In conclusion, light plays a crucial role in co-metabolic processes of TOrCs.

Electricity production and key exoelectrogens in a mixed-culture psychrophilic microbial fuel cell at 4 °C.

The electricity production via psychrophilic microbial fuel cell (PMFC) for wastewater treatment in cold regions offers an alternative to avoid the unwanted methane dissolution of traditional anaerobic fermentation. But, it is seldom reported by mixed-culture, especially closed to 0 °C. Thus, a two-chamber mixed-culture PMFC at 4 °C was successfully operated in this study using acetate as an electron donor. The main results demonstrated a good performance of PMFC, including the maximum voltage of 513 mV at 1000 Ω, coulombic efficiency of 53%, and power density of 689 mW/m2. The cyclic voltammetry curves of enriched biofilm showed a direct electron transfer pathway. These good performances of mixed-culture PMFC were due to the high psychrophilic activity of enriched biofilm, including exoelectrogens genera of Geobacter (6.1%), Enterococcus (17.5%), and Clostridium_sensu_stricto_12 (3.8%). Consequently, a mixed-culture PMFC provides a reasonable strategy to enrich exoelectrogens with high activity. For low-temperature regions, the mixed-culture PMFC involved biotechnologies shall benefit energy generation and valuable chemical production in the future. KEY POINTS: • PMFC showed a maximum voltage of around 513 mV under a resistance of 1000 Ω. • The coulombic efficiency was 53% and the max power density was 689 mW/m2. • Geobacter, Enterococcus, and Clostridium_sensu_stricto_12 were key exoelectrogens.